Advertisement
D600
DSG045
Step 1
Fit Front Mounting Bracket Assembly (06) to a symmetric position on the trailer drawbar
using the U Bolt (10) M12(50T) x 100(W) x 180(L) or U Bolt (11) M12(75T) x 77(W) x 130(L)
depending on chassis thickness.
Warning:- Ensure any cables running along or under the chassis are not interred with
06
Step 2
Fit Outer Mounting Plates Assy (07) to each end of the Front Mounting Bracket Assy (06)
using the M12 x 25 Bolts, Spring Washer and nuts (13). Do tighten at this stage, but these
may need adjusting in or out during the assembly process.
07
07
06
4
Advertisement
