Kenwood TM-241A Instruction Manual page 13

4. CTCSS 4| Ў
QU =
Еғва8 888588.
qgnesenesenuss6Al EE... ,
"4-2444 ^L "2.1 step È ;
D REV/STEP key
DR/DT function |.
ALT function
5-1-2
D LOCK
© & ©
da
«o
A.LOCK
«Exi»
DTSS
DRS
APO
ee UVER —
LOW MIO
LCD Display Panel
DECLA a» 439
v &
On when the Lock function has been
activated.
On when the & Lock function has
been activated.
On when the Automatic Lock Tun-
ing function is active. When the ALT
system is operating the direction in-
dicator
will turn on
if the system
shifts the receiver frequency.
On when the DTSS function has
. been activated.
On when the Digital Recording Sys-
tem is active.
On when the Automatic Power Off
function has been activated.
On when the squelch opens.
This level meter indicates the rela-
tive receiver signal strength or the
relative transmitter power output.
Indicates the relative output power
setting for transmit.
No indicator
for high power.
On when the Time Out Timer func-
tion has been activated.
On during transmit.
13