Table of Contents
Advertisement
PRECAUTIONS
SAFETY
Before connecting the instrument to the power source, care-
fully read the following information, then verify that the
power cord and power line fuse are ones for your power line.
The instrument's rear panel has a fuse holder on the left of
the AC inlet terminal (the fuse holer also serves as a vol-
tage selector). The value under the triangle V marked on
the holder indicates the line voltage set for the instrument.
lf the power cord is not applied with the correct voltage,
there is a danger from electric shock.
® When converting the voltage, refer to the Maintenance
section.
Line voltage
This instrument operates using ac-power input voltages that
100/120/220/240 V at frequencies from 50 Hz to 60 Hz.
Power cord
Line fuse
EQUIPMENT
PROTECTION
4.
10.
Advertisement
Table of Contents
