Sony SLV-D550P Operating Instructions Manual page 62

[] Use this hookup if your AN receiver has a Dolby Digital or DTS*
decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of
your AV amplifier (receiver). You are not able to enioy the surround sound effects of
this player. You must make connections using m and F_II.
:: "DTS" and "DTS Digital Out" are tradelnarks of Digital Theater Systems. Inc.
DVD-VCR
LiNE LiNE
Stereo audio Coaxial digital
(red) cord (not cord (not supplied)
_: Signal flow
to audio input
Rear (L) Subwoofer
Rear (R)
AV amplifier (receiver) having
a decoder
to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
............ Optical digital cord (not
supplied)
I Remove jack cap
before connecting
_,to coaxial or optical
_F digital input
[Speakers]
Front (L) Center
Front (R)
Note
• After you have completed the connection, be sttre to set "Dolby Digital" to "Dolby Digital"
and "DTS" to "On" in "AUDIO SETUP" menu (page 65). Otherwise, no sound or a loud
noise will come fi-om the speakers.
62 AN
Receiver
hookup