Table of Contents
Advertisement
identifying the Parts
Front panel
To be continued
POWER switch
Turns the unit on and off. When the power is on, the
back light of the display window illuminates and the last
indication appears. For a few seconds after switching
on, the sound being input will be directly output since
the bypass function works.
INPUT control
Adjusts the input levels of two channels independently.
The outside knob controls channel 1 and the inside
knob controls channel 2. Since they are linked with
each other, hold whichever you do not use to adjust for
one channel only.
DRY (original sound) control
Adjusts the output level of the source signal which is
clear of any effect. Using this control in conjunction with
the EFFECT control can adjust the balance between the
source signal and the effect signal when mixing them.
To output only the effect signal, set the control to "0".
EFFECT control
Adjust the output level of the effect signal. Using this
control in conjunction with the DRY control can adjust
the balance between the source signal and the effect
signal when mixing them.
Input level meter
Indicates input level for both channels independently.
Adjusts the INPUT control so that 0 GB is lit when the
signal of the reference level is input. 0 dB means the
head room of 20 dB. When the signal exceeds this head
room, "OVER?" illuminates.
This meter does not work when the BYPASS button is
pressed.
[6 | MIDI indicator
liluminates when the unit receives the MIDI program
change signal or control change signal.
REMOTE indicator
llluminates when the unit receives the signal from an
optional remote commander.
Display window
A display of 40 characters by 2 lines on which names of
called memory, parameter values and/or messages are
indicated. Displayed indication is easy to read in a dark
hall or a studio due to the back lighting.
[9 ] LOAD button
Press the button to call up the memory.
[10] HELP button
Press the button to display information or messages
necessary to proceed with operation.
= =
EDIT button
Press the button to change parameter values in the
memory.
SAVE button
Press the button to save the effects individually created
in the user memory.
BYPASS button
Press the button to output the input signal directly.
ENTER button
Press the button every time you have finished selecting
or setting parameters.
Operating dial
Selects preset numbers and/or sets parameters.
GETTING STARTED
7
syeg
oy}
GuApua
e dn Guryooy
Advertisement
Table of Contents
