Channel Manager - Hitachi 50C10 Service Manual

II. FEATURES AND FUNCTIONS

4.2 CHANNEL MANAGER

Chan. Manager
Select Antenna if you are using an indoor or outdoor antenna. Select Cable if you have cable TV.
Chan. Manager
Ant. A
Ant. B
Move
SEL
Chan. Manager
Ant. A
Channel Source
Antenna
Auto Channel Scan
Channel List
Move Select
SEL
Use THUMB STICK , to highlight the correct Channel Source.
Press the THUMB STICK to select highlighted source.
Press EXIT to quit the MENU.
RECEPTION BAND
CATV CHANNEL
AIR
VHF 2~13
Mid band A~1
A-5 ~ A-1
VHF 2 ~ 13ch
Super band J~W
UHF 14 ~ 69ch
Hyper band
W + 1 ~ W + 28
Ultraband
W + 29 ~ W + 84
BACK TO ADJUSTMENTS
Select
Cable(1) Cable(2)
Start
CATV 1 OR CATV 2
Indicated on
the screen
2 ~ 13
14 ~ 22
95 ~ 99
23 ~ 36
37 ~ 64
65 ~ 125
Chan. Manager
Ant. A
Channel Source
THUMB
Antenna
STICK
Auto Channel Scan
SELECT
Channel List
Move Return
SEL
THUMB
STICK
NOTE:
If certain CATV channels are poor or not possible in
Cable(1) mode, select Cable(2).
Reception channels for each mode are shown at the left.
Refer to your cable or TV guide for channel identification standards.
38
LC37/LC37F
Cable(1) Cable(2)
Start