Sony Handycam HDR-SR11 Operating Manual page 6

• Connect cables to tile connectors of tile
Handycanl Station when using your canlcorder
attached to the Handycam Station. Do not
connect the cables to both tile Handycanl
Station and your canlcorder.
• Do not apply shock or vibration to your
canlcorder. The internal hard disk of the
canlcorder nlay not be recognized or recording/
playback may not be possible.
• Do not u_ your canlcoMer ill very loud areas.
Tile hard disk of your canlcorder may not be
recognized, or recording may not be possible.
• To protect the internal hard disk hom shock by
dropping, tile camcorder has drop sensor
Ihnction*. When a drop occurs, or under a non-
gravity condition, tile block noise made when
lids flmction is activated by tile camcorder nlay
also be recorded. If the drop sensor catches a
drop lvpeatedly, recording/playback may be
stopped.
• When tile tcnlperature of file camcorder
becomes extremely high or extlvmely low, you
nlay not be able to record or play back on the
catllcorder, due to tile protection l_alUl_2S of the
canlcorder being activated in such situatkms. In
this case. a message appears on tile LCD screen
or in tile viewfinder (p. 30).
• DO 11(71 IUrll on
the camcorder in
a low-plvssurc
area, where the altitude is more than 3.000
nleters (9,gh_l leer). Doing so may damage tile
hard disk drive of your canlcorder.
• If you repeat recording/deleting inlages k_r a
long lime, lragmentation of data occurs (in l]le
medkt, hnages cannot be saved or recorded. In
such a case, save your images on sonic type of
external nledia first, and then perlornl [MEDIA
FORMAT]*.
• Fasten the grip belt and hold your canlcorder
correctly while recording.
• To adjust tile LCD panel, open tile LCD panel
90 degrees to file camcorder (@), then rotate it
to the best angle to record or play (@). You can
rotate the LCD panel 180 degrees to the lens
side (@) to record in nlirror nlode.
@90 degrees to the
camcorder
@90 degrees
(max.)
@ 180 deg rees (max.)
• Tile viewfinder and tile LCD screen are
manulactured using extremely high-prcciskm
technology, so over 99.99% of the pixels are
operational Ior elllrctive use. However, there
nlay be some tiny black points and/or bright
points (white, red, blue, or green in color) that
appear constantly on the LCD screen. Tbese
points are normal results of the manuh_cturing
process and do not afl)ct the recording in ally
way.
• Renlove the insulation sheet belore using the
tenlote Conlnlander.
Insulation sheet
f
Types of"Memory Stick" youcanuse
with your camcorder
• For recording nlovies, it is reconmlended that
you use a '_[Vlemory Stick PRO Duo' ol I GB or
larger marked with:
II/]EMDRY_TJEK PIR_ DUO ( "Menloly Stick
PRO Duo")*
MEMllRYSTI[RPRI]-HI_[III[I ('Memoly Stick
PRO-HG Duo")
* Marked wilh Mark2 or not, either call be
used.
• A "Memo W Stick PRO Duo" of 1117 t o g GB has
been confirnled to operate correctly with this
camcorder.