Mounting Mirror Kit - Hussmann PMN20F3R Installation Manual

INSTALLATION INSTALLATION
3.13

MOUNTING MIRROR KIT

• Start with lower mirror bracket first.
• Two cutouts are provided at the top of each up-
right frame, for fitting the mirror lower brackets.
• The brackets will need to be fitted in the lower
cutout.
• Insert top end of bracket first, as shown in Figure
3AN.
• Once top of bracket has been fully inserted, drop
bottom of bracket towards the case upright as
shown in Figure 3AO.
Bracket Insert Here Bracket Insert Here
PAGE 28
•
•
•
•
FIGURE 3AN
FIGURE 3AO
Once lower brackets are fitted, commence fitting
of upper mirror brackets.
Two pairs of holes are provided at the back end of
the ceiling panel. The brackets are to be fitted to
the front pair of holes in the ceiling panel.
Fasten upper brackets to ceiling panel with the tek
screws provided as shown in Figure 3AP.
Repeat upper bracket fastening for each end of the
mirror as shown in Figure 3AQ.
Bracket Insert Here Bracket Insert Here
PMN20F3R MULTIDECK - HUSSMANN PMN20F3R MULTIDECK - HUSSMANN
FIGURE 3AP
FIGURE 3AQ