Related Manuals for Huskie Tools REC-MK758U
Summary of Contents for Huskie Tools REC-MK758U
- Page 1 OPERATOR MANUAL FOR MODEL: REC-MK758U 6 Ton Battery Powered Compression Tool WARNING To reduce the risk of injury, user must read and understand manual completely before first using this product and save this manual for future use.
- Page 2 THIS PAGE INTENTIONALLY LEFT BLANK...
-
Page 3: Table Of Contents
MODEL: REC-MK758U THANK YOU for purchasing a Huskie Tools product. Our mission is to supply the finest cable connecting and cutting tools and cable-related products to the transmission and distribution markets. Huskie Tools products will represent state-of-the-art tools and be dependable and safe. -
Page 4: Description
MODEL: REC-MK758U DESCRIPTION The REC-MK758U is a battery powered compression tool with a 6-ton output. The intended use of this tool is WHAT’S INCLUDED EACH TOOL KIT INCLUDES THE FOLLOWING: ɨ ? ɨ 18V-5.0Ah battery pack ɨ Battery charger ɨ Tool bag... -
Page 5: Safety Symbols
Failure to observe “power tool” in all warnings refers to your battery this warning could result operated (cordless) power tool. in severe injury or death. Do not discard this product or throw away! For recycling information, contact 800-822-8837 REC-MK758U - OPERATOR MANUAL... -
Page 6: Safety Information
• Maintain tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the tools operation. If damaged, have the tool repaired before use. REC-MK758U - OPERATOR MANUAL Copyright © Huskie Tools 2019... - Page 7 • Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and product using battery pack. • To reduce the risk of injury, charge only Huskie Tools Battery Pack model BP-185. Other types of batteries may burst causing personal injury and damage.
-
Page 8: Operating Instructions
To turn auto retraction or off, remove rubber grommet and use a flat blade screwdriver to rotate the indicator 90 degrees to either position as shown below: ON OFF Lift Grommet REC-MK758U - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 9: Troubleshooting Guide
Connector is jammed in tool Press and hold release trigger jaws while prying tool jaws apart Release trigger is bent or mis- Consult factory for repair service aligned REC-MK758U - OPERATOR MANUAL... -
Page 10: Maintenance Notes
MODEL: REC-MK758U MAINTENANCE NOTES REC-MK758U - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 11: Warranty Information
Huskie. These remedies are exclusive, and the total liability of Huskie Tools, LLC whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the tool. In no event, shall Huskie Tools, LLC be liable for consequential, incidental or special damages. - Page 12 Glendale Heights, IL 60139 Phone 800-860-6170 Fax 800-345-3767 www.HuskieTools.com Huskie Tools reserves the right to change this information without further notice and holds no liability for printing errors in this content. Copyright © 2019 Huskie Tools, Inc. All Rights Reserved.