Table of Contents
Related Manuals for Huskie Tools Pro Line 7 Series
Summary of Contents for Huskie Tools Pro Line 7 Series
- Page 1 OPERATOR MANUAL FOR MODEL: ECO-7336B 6 Ton Battery Operated Streamline Cutting Tool WARNING To reduce the risk of injury, user must read and understand manual completely before first using this product and save this manual for future use.
- Page 2 THIS PAGE INTENTIONALLY LEFT BLANK...
-
Page 3: Table Of Contents
MODEL: ECO-7336B THANK YOU for purchasing a Huskie Tools product. Our mission is to supply the finest cable connecting and cutting tools and cable-related products to the transmission and distribution markets. Huskie Tools products will represent state-of-the-art tools and be dependable and safe. -
Page 4: Description
Output/Force ......... 6 tons (53 kN) 6. Advance Trigger 7. Moveable Cutting Blade Cutting Capacities ACSR ............336 MCM Aluminum ............ up to 1” Copper ..............4/0 Standard guy wire ...........3/8” ECO-7336B - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 5: Safety Symbols
MODEL: ECO-7336B SAFETY SYMBOLS You will see this symbol Exclamat throughout this manual. This purpose of this symbol is to call your attention Read all instructions and to hazards and/or unsafe practices that have the safety information detailed potential to cause injury or property damage. The in this operator manual prior severity of each hazard is further explained in to operating or servicing... -
Page 6: Safety Information
ɨ Maintain tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the tools operation. If damaged, have the tool repaired before use. ECO-7336B - OPERATOR MANUAL Copyright © Huskie Tools 2019... - Page 7 ɨ Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and product using battery pack. ɨ To reduce the risk of injury, charge only Huskie Tools Battery Pack model BP-185. Other types of batteries may burst causing personal injury and damage.
-
Page 8: Operating Instructions
A series of clicks will be heard while the tool running in a “neutral” mode. This indicates that the tool has built full pressure and bypassed and can now be released. CHECK-SQ Window-c Figure 8A. Correct material placement. Figure 8B. Incorrect material placement. ECO-7336B - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 9: Troubleshooting Guide
MODEL: ECO-7336B TROUBLESHOOTING GUIDE Before You Begin 1. Make sure that the battery is charged. Recheck the battery after several minutes to make sure the battery is holding its charge. 2. Use a nonflammable contact cleaner or pencil eraser to clean the electrical contacts on the battery and tool. -
Page 10: Maintenance Notes
MODEL: ECO-7336B MAINTENANCE NOTES ECO-7336B - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 11: Warranty Information
Huskie. These remedies are exclusive, and the total liability of Huskie Tools, LLC whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the tool. In no event, shall Huskie Tools, LLC be liable for consequential, incidental or special damages. - Page 12 Phone 800-860-6170 Fax 800-345-3767 www.spartacogroup.com Huskie Tools reserves the right to change this information without further notice and holds no liability for printing errors in this content. Copyright © 2018 Huskie Tools, Inc. All Rights Reserved. Document ID: PD_3004 REV 0119...