Candy Smart Pro CSOE H8A2DE-S Manual page 74

l
The key lock can be simply cancelled by
pressing the two buttons simultaneously
again.
l
In case of opening of porthole with
activated CHILD LOCK, the cycle stops
but the lock is kept: to restart the cycle,
you must remove the lock and press
START/PAUSE again.
l
CHILD LOCK can be modified at any
time of the cycle.
Display
The display shows the remaining time for
drying, the postponed time in case of
delayed start
notifications setting.
1) DRYING SELECTION INDICATOR
LIGHTS
The indicator lights display the degrees
of dryness that can be selected by the
relevant button.
2) WATER CONTAINER INDICATOR LIGHT
It lights up when it's necessary to empty the
condensate water tank.
3) LINT FILTERS AND HEAT EXCHANGER
CLEANING INDICATOR LIGHT
The indicator light illuminates in fixed mode
to signal the need of cleaning the lint filters
and in blinking mode to signal the need of
cleaning the heat exchanger.
selection and
1 4 3 2
4) Wi-Fi INDICATOR LIGHT
l
On models equipped with Wi-Fi, it
indicates the status of the connection. It
could be:
- FIXED ON: remote control enabled.
- SLOW
disabled.
- QUICK FLASHING FOR 3 SECONDS,
THEN OFF: the machine cannot connect
to the home Wi-Fi network or has not yet
been associated with the App.
- SLOW BLINKING FOR 3 TIMES, THEN
OFF FOR 2 SECONDS: reset of the Wi-Fi
network (during the association with the App).
other
- ON FOR 1 SECOND, THEN OFF FOR 3
SECONDS: the door is open. Remote
control cannot be activated.
l
For all
functionality and the instructions for an
easy configuration of the Wi-Fi, please
refer to: go.he.services/ctd-3d
74
FLASHING: remote
the information
control
about the