Troubleshooting - ViewSonic ViewPanel VE170 User Manual

• Press Power button ON.
• Make sure AC power cord is securely connected to the DC power supply
and the power supply is firmly connected to the ViewPanel
• Plug another electrical device (like a radio) into the power outlet to verify
that the outlet is supplying proper voltage.
• Make sure all short cables are installed see Installation section.
• Make sure the video cable supplied with the ViewPanel is tightly secured to
the video output port on the back of the computer. If the other end of the
video cable is not attached permanently to the ViewPanel, tightly secure it
to the ViewPanel.
• Adjust brightness.
• If any colors (red, green, or blue) are missing, check the video cable to
make sure it is securely connected. Loose or broken pins in the cable
connector could cause an improper connection.
• Connect the ViewPanel to another computer.
• Check ViewMatch
• Make sure video input signals are within the ViewPanel's specified
frequency range.
• Try the ViewPanel with another power source, graphics card, or computer
system.
• Connect the video cable securely.
• Press only one button at a time.
ViewSonic VE170/VE170b
®
color menu for proper settings
®
.
Other Information