Table of Contents
Advertisement
USBRECORDING
Connectingexternaldatamedia
Notes:
It is advised to put the television on stand-by
7
mode before connecting the External Data
medium.
Before disconnecting the external data
7
medium, the television must first be
switched to standby, otherwise files can be
damaged.
There are two USB inputs on the television,
7
namely USB2(HDD) and USB1.
USB2(HDD) input is intended for USB
devices that require additional power (e.g.
external hard disk).
USB2
(HDD)
1
Plug the external hard disk to the USB2
(HDD) USB interface of the television.
or
plug the memory stick in one of the USB1
sockets of the television.
-------------------------------------------------------------------------------------------
Notes:
USB1 port of the TV supports 500 mA
7
current according to the USB standard.
Devices such as external hard disk and
etc. that consume more power can only
be connected to the USB2(HDD) USB
interface of the television.
If you are using a power cable for the
7
external hard disk that you have connected
to the USB2(HDD) USB interface, then
the power cable of the external hard disk
must also be unplugged when the TV is
turned off.
You must not disconnect the USB Device
7
from the TV while a file on the USB Device
is being read by the TV.
ENGLISH
35
Advertisement
Table of Contents
