Table of Contents
Advertisement
USBRECORDING
SwitchingtheTVtostand-byduring
recording
1
Select the channel.
2
Press »
« to open the Quick menu.
q
3
Select the line »Recording« with »
»
« and press »
Λ
4
To switch the TV to stand-by, press »
5
To continue recording and switch to stand-
<
by, press »
«;
or
to end recording and switch the TV to stand-
>
by, press »
«.
Recordingaprogrammefromthe
channellist
1
Press »
« to open the channel list.
2
Select a channel with »
press »
« to confirm.
3
« to exit the channel list.
Press »
r
4
Press »
q
« to open the Quick menu.
5
Select the line »Recording« with »
»
« and press »
Λ
– R ecording information will be displayed:
Recording symbol, channel name,
programme time and recording time.
– T hese information will disappear after
a short while. Recording symbol and
recording time will appear on the lower
right corner of the screen.
6
To stop recording, press »
»
« button with »
7
7
To stop recording, press »
or
to continue the recording, press »
select »No«.
38
ENGLISH
-------------------------------------------------------------------------------------------
« or
V
« to confirm.
8
«.
« or »
« and
V
Λ
« or
V
« to confirm.
« and select
Λ
<
>
« or »
«.
<
« to select »Yes«;
>
« to
Programmesettingfor
recording
...withelectronicprogrammeguide
Electronic programme guide data can be used
for recording.
1
Press »
« to open the Quick menu.
q
2
Select the line »Program Guide« with »
or »
« and press »
Λ
3
Select the preferred TV program with »
or »
«.
Λ
– I nformation about the actual TV program
will be displayed.
4
Press »« (red) to add broadcasts to the
timer.
– I nformation for the TV program to be
recorded will be displayed.
5
In the »Program information« line, press »
>
or »
« to select the program you want to
record.
6
Press »« (red) to confirm.
– R ecording data range appears.
Notes:
A warning is displayed before the timer
7
recording starts and counts down for
15 seconds to allow you to switch to
the channel. At the end of 15 seconds,
the channel to be recorded appears
automatically.
If the timer recording starts during
7
playback, playback stops. If you do
not select »Yes« in the warning prompt,
recording will start automatically at the end
of the countdown.
Only for UPC customers Note: Parts of
7
previous or next files can be included into
the record while the programme is being
recorded resulting from possible Programme
Guide errors. In such cases, keep in mind
that the highest family protection level will
apply for the whole recording if one or
more of those programmes have any level of
family protection.
V
« to confirm.
V
<
«
«
«
Advertisement
Table of Contents
