Control Buttons On The Tv; Buttons Of The Remote Control; Turning On The Television And Switching It To Standby Mode; Adjusting The Volume Or Changing The Station - Grundig 50 GUA 7100 Barcelona User Manual

OVERVIEW
AC­IN: Power cord input.
7
SERVICE: Service only.
7
­ L AN: Network connection.
7
­ O ptic­Out: optical audio output.
7
­ U SB2­(HDD): Data media such as an
7
external hard disk to record programs will be
connected here.
­ H DMI3­(ARC): Input for digital audio and
7
image data.
­ H DMI2:­Input for digital audio and image
7
data.
­ S ATELLITE:­Input for satellite antenna signal.
7
Suitable for single-cable SCR system.
­ A NT­IN: For antenna cable (terrestrial
7
antenna or cable connection).
: External audio output or headphone jack
U
7
with adapter.
­ U SB­1: For data media and keyboard.
7
­ H DMI1:­Input for digital audio and image
7
data.
­ C I: For CA modules for receiving scramble
7
channels.
14­ ENGLISH
­--------------------------------------------------------------------------------------------------------------
Control­buttons­on­the­TV
Buttons­of­the­remote­control
Turning­on­the­television­and­
switching­it­to­standby­mode
1­ Press 8 /I to turn on the television in the
stand-by mode.
2­
Press 8 /I to switch the television to the
stand-by mode.
Adjusting­the­volume­or­
changing­the­station
1­ Use V/P button to select »Set to Audio
Navigation« or »Set to Channel
Navigation«.
2­
Press + to increase the volume/channel.
3­ Press – to decrease the volume/channel.