Table of Contents
Advertisement
en Before using for the first time
Switching the lighting on or off
Setting the brightness
Before using for the first time
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
Basic operation
7 Basic operation
7.1 Switching on the appliance
Press
.
▶
a The appliance starts at fan setting 2.
7.2 Switching off the appliance
Press
.
▶
7.3 Selecting a fan setting
Press , or .
▶
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
To switch on intensive mode 1, press .
▶
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
Additional functions in the Home Connect app
8 Additional functions in the Home Connect app
You can find these functions in the Home Connect app:
8.1 Intelligent hood control
With the appropriate hob and the Home Connect app,
cooking data is supplied continuously and the appli-
ance uses this to automatically adjust the fan setting.
8.2 Performance profile
In the Home Connect app, you have the option to set
your personal performance profile. You can choose
between the noise-optimised or performance-optimised
performance profile.
8.3 Filter saturation
You can set the saturation indicator in the Home Con-
nect app depending on the filter used.
1
Available depending on software version. Further information on availability can be found on the website.
6
Home Connect
6.1 Setting an operating mode
Your appliance is set to air recirculation mode by de-
fault.
7.5 Switching off intensive mode
Reset to the required fan setting.
▶
7.6 Setting the PowerBoost position
On the appliance, the glass front can be adjusted to an
intermediate position. The intermediate position can be
used to eliminate particularly strong cooking smells
and large amounts of steam.
Take hold of the glass front in the centre and open
▶
it carefully.
7.7 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press
.
▶
7.8 Setting the brightness
Press and hold
until the required brightness is
▶
reached.
8.4 Cooktop-based Hood Control
You can connect your appliance to a Home Connect-
compatible hob and, in this way, control the functions
of your appliance via the hob.
8.5 Fan run-on
The fan run-on removes remaining odours and is used
to dry the odour filter after the cooking process.
8.6 Interval ventilation
In order to regularly ventilate your kitchen, you can use
the interval ventilation. With interval ventilation, the vent-
ilation system switches on and off in the selected set-
ting for the selected time.
8.7 Voice Control
You can control your extractor hood using voice control
with Amazon Alexa, for example.
1
Advertisement
Table of Contents
