Advertisement
[4] BASIC OPERATION
1 Open the back cover.
2 Load the film. Pull out the film leader
end to reach the [FILM @ ] mark @.
If there is dirt on the film detector @,
the film cannot be wound properly.
3 Close the back cover.
The film automatically advances to the
first frame.
If "E" blinks on the LCD panel, repeat step 1-3
to load the film properly.
4 Open the lens protector to turn the
switch ON.
Compose your subject by using the
zoom button and focus on the subject
within the autofocus frame.
6 Press the shutter release button
halfway down to confirm the focus with
green lamp lights on, and press the
shutter release button completely to
take a picture. The flash automatically
discharges in low light.
7 The film will be rewound automatically
after you have exposed the last frame
of the roll.
8 Unload the film after confirm "0" blinks
on the LCD panel.
* When the lens protector is opened, the lens
slightly extends.
e When the camera is left unused for 3
minutes with the power on, the zoom lens
automatically retracts to 38 mm to prevent it
from damage.
ETA
Ra:
Advertisement
