Declaration Of Conformity - Packo HP Series Instruction Manual

1.4 DECLARATION OF CONFORMITY

Declaration of conformity according to annex IIA of the "Machinery"
Directive 2006/42 EC
We,
JEC LTD
15-26, Beodeul-ro 1362, Paltan-myeon, Hwaseong-si,
Gyeonggi-do, 18578, Rep. of Korea
confirm that the Packo pump type ......................................, with serial number ....................................
fully complies with the Directive Machinery and with the (harmonised) standard EN 809, ENISO12100.
It must be brought to your attention that our product is intended to be built into a machine, and that,
on the basis of the "Machinery" Directive, the complete (compound) machine can only be applied after
matching the stipulations of the European demands.
JEC LTD 15-26, Beodeul-ro 1362, Paltan-myeon, Hwaseong-si, Gyeonggi-do, 18578, Rep. of Korea
authorized to make up the technical construction file.
Date
.............................
Signature:
.............................................................................................................................
JEC Ltd
is
4