FiT DISPLAY COMPACT Instruction Manual page 41

INSTRUCTION MANUAL
Error code Error message displayed
15-0A Remote charger pairing error
15-0B Remote lock pairing error
16-00 Remote theft detection
16-01 Motor theft detection
16-02 Display theft detection
16-03, 16-04, Battery theft detection
16-05, 16-06
16-07 Speed node theft detection
16-08 Gears theft detection
16-0A Charger theft detection
FIT_Manual_Display_Comfort_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023
FIT DISPLAY COMFORT + FIT REMOTE BASIC / ESHIFT PINION
Action / Restriction
1. Restart the system.
2. Switch the system off.
3. Disconnect the charger from the system and
socket.
4. Wait until status LED goes out.
5. Check plug contacts on the e-bike and charger
and clean if necessary.
6. Reconnect the charger to the socket.
7. Reconnect the charger to the system and start
the system.
8. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. Switch the system off.
3. Remove display from holder, check contacts and
clean if necessary.
4. Re-insert the display and start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. Switch the system off.
3. Remove the battery from the holder, check
contacts and clean if necessary.
4. Re-insert the battery and start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. Switch the system off.
3. Disconnect the charger from the system and
socket.
4. Wait until status LED goes out.
5. Check plug contacts on the e-bike and charger
and clean if necessary.
6. Reconnect the charger to the socket.
7. Reconnect the charger to the system and start
the system.
8. If the problem persists, please contact your
specialist dealer.
41