Subscribe to Our Youtube Channel
Related Manuals for ANSI FRONTLINE ACEL18S
Summary of Contents for ANSI FRONTLINE ACEL18S
- Page 1 Positioning Lanyard THE INSTRUCTIONS APPLIES TO THE FOLLOWING MODELS: ACEL18S, LPO61SADJ BKLFL 04...
- Page 2 Warning Users must provide this instructions to the authorized persons. Then read and understand it carefully before use this equipment. This User Instruction is not to be removed except by the user of this equipment. Current User Instruction must always be available to the user. Positioning lanyard is used to connect the safety harness or positioning belt to an anchorage point prevent the user reaching a position where a fall is possible.
- Page 3 Limitations for Use Positioning lanyards are not intended for fall arrest unless fitted with a shock absorber confirming to ANSI Z359.13-2013 and the overall length must not exceed 6FT. Positioning lanyards must be used with a full body harness. Positioning lanyards are designed for a single user.
- Page 4 Compatibility of components and subsystems This equipment is designed for use with ANSI approved components and subsystems. Substitutions or replacements made with non-approved components or subsystems may be incompatible, and may jeopardize the safety and reliability of the complete system.
- Page 5 Training Employers are responsible for providing training to any employee who may be exposed to fall hazards. Training will enable an employee to recognize and reduce fall hazards. Training must be conducted by a Competent or Qualified Person. Trainer and trainees must not be exposed to fall hazards during the training course.
- Page 6 Labeling All labeling must be legible and attached to the lanyard. Just for Twin-legged Positioning Lanyard Label Label Label...
- Page 7 Notes If equipment fails inspection IMMEDIATELY REMOVE FROM SERVICE. User must inspect prior to EACH use. Competent Person other than user must complete formal inspection at least every 6 months. Competent Person to inspect and initial. Date of first use: ________________. Product lifetime is 5 years as long as it passes pre-use and Competent Person inspections.
Need help?
Do you have a question about the FRONTLINE ACEL18S and is the answer not in the manual?
Questions and answers