XO Appliance XOC VISOR Manual page 13

the cut out
To install the hood into a custom canopy or cabinet, refer to the cutout dimensions
above for your particular model. Gap around the unit should be minimized (~ 1/16")
to ensure a snug fit.
NOTE:
This product can be installed in 3 different ways, depending on the model and on
your requirements:
1- installation of the hood on the lower part of the wall unit.
2- installation of the hood on the lower part of the wall unit on a divider support.
3- Installation of the hood on the lower part of the wall unit only for 30".
MODEL
XOC24SC
XOC30SC
XOC36SC
WIDTH
19-3/4"
19-3/4"
31-9/16"
- 13 -