Installing The Inner Frame - Dell Precision 7550 Service Manual

About this task
The figure indicates the location of the inner frame and provides a visual representation of the removal procedure.
Steps
1. Unroute the WLAN and WWAN antenna cables from the routing guide.
2. Remove the eight (M2x5) and the ten (M2x2.5) screws that secure the inner frame to the computer chassis.
3. Remove the inner frame from the computer.

Installing the inner frame

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the inner frame and provides a visual representation of the installation procedure.
50 Desmontaje y reensamblaje