Table of Contents
Advertisement
Available languages
Available languages
Problem
Solution
Fan will not start.
1. Check circuit fuses or breakers.
2. Check line wire connections to the fan and switch wire connections in the switch housing.
CAUTION: Make sure main power is off.
Fan sounds noisy.
1. Make sure all motor housing screws are snug.
2. Make sure the screws that attach the fan blade bracket to the motor hub is tight.
3. Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing.
CAUTION: Make sure main power is off.
4. Allow a 24-hour "breaking-in" period. Most noise associated with a new fan disappear during this time.
5. If using an optional light kit, make sure the screws securing the glassware are tight. Check that light bulb is also secure.
6. Make sure the upper canopy is a short distance from the ceiling. It should not touch the ceiling.
Fan has lost its
1. Turn the AC power off to fan, and re-do steps for programming on page 9.
programming
repeatedly.
2. Do not turn off fan from standard wall switch. Use only our wall switch or your remote to regulate fan.
13. Troubleshooting
Advertisement
Chapters
Table of Contents
