General Maintenance - Flex FX1431 Operator's Manual

SERVICE
WARNING
personnel may result in misplacing of
internal wires and components which could
cause a serious hazard. We recommend that
all tool service be performed by a FLEX Factory
Service Center or Authorized FLEX Service
Station.

GENERAL MAINTENANCE

WARNING
parts. Use of any other parts could create a
hazard or cause product damage. Periodically
inspect the entire product for damaged, missing,
or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and
do not operate this product until all missing or
damaged parts are replaced. Please contact
customer service or an authorized service
center for assistance.
WARNING
battery pack from the charger/tool when
cleaning or performing any maintenance.
MAINTENANCE
Preventive maintenance
performed by unauthorized
When servicing, use only
identical replacement
To avoid serious personal
injury, always remove the
The tool may be cleaned most effectively with
compressed dry air.
WARNING
tools with compressed air. Ventilation
openings and switch levers must be kept clean
and free of foreign matter. Do not attempt to
clean by inserting pointed objects through
openings.
WARNING
plastic parts. Some of these are: gasoline,
carbon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
Store the tool indoors in a place that is
inaccessible to children. Keep away from
corrosive agents.
-17-
CLEANING
Always wear safety
goggles when cleaning
Certain cleaning agents
and solvents damage
STORAGE