Table of Contents
Advertisement
Important
• Do not push the sides of the ink tank. If you push the sides of the ink tank with the Y-shape air
hole (B) blocked, ink may splash.
• Do not touch the inside of the orange protective cap (C) or the open ink port (D). The ink may
stain your hands if you touch them.
• Do not reattach the protective cap (C) once you have removed it. Discard it according to the local
laws and regulations regarding disposal of consumables.
5. Install the new ink tank.
1. Insert the front end of the ink tank into the print head at a slant.
Make sure that the position of the ink tank matches the label.
Note
• To install a black pigment (PGBK) ink tank, insert it in the middle of the correct position with equal
spaces on the left and right sides.
2. Press on the top of the ink tank until the ink tank snaps firmly into place.
Make sure that the ink lamp lights up red.
This manual downloaded from http://www.manualowl.com
73
Advertisement
Table of Contents
