Download Print this page

Canon PIXMA iX6820 Connection Manual

Getting your printer back on your network after a router or network change.
Hide thumbs
   

Advertisement

Next >>
<< Previous
Getting Your Printer
Back On Your Network
After A Router Or Network Change
PIXMA iX6820
Windows and Mac OS
1

Advertisement

   Also See for Canon PIXMA iX6820

   Related Manuals for Canon PIXMA iX6820

No related manuals

   Summary of Contents for Canon PIXMA iX6820

  • Page 1

    Next >> << Previous Getting Your Printer Back On Your Network After A Router Or Network Change PIXMA iX6820 Windows and Mac OS...

  • Page 2

    << Previous Next >> If any of the following situations exist • You have replaced your Router or Access Point • You want to use a different wireless network • Router settings have been changed. Please complete the following steps to apply the new configuration settings to your printer.

  • Page 3

    Preparing to Connect My Printer << Previous Next >> To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network.

  • Page 4

    << Previous Next >> Connect the PIXMA iX6820 to Your Wireless Network To re-establish communication on the network after changing the router / Access Point or when connecting to a different network, the settings on the printer need to be changed...

  • Page 5

    Connecting to the Network << Previous Next >> On the Connection Method Selection screen, be sure to select Wireless Connection. When the Preparation for Connection screen appears, make sure the printer is turned on, then click Next. When the Printer Setup screen appears, click Connect to the Network.

  • Page 6

    Installing the Drivers & Software - Connecting to the wireless network Select Cableless setup on Setup Procedure Selection screen (3-1).

  • Page 7

    Installing the Drivers & Software - Connecting to the wireless network As instructed, press and hold the Wi-Fi button (A) until the white power lamp flashes 2 times and then release. Once that is done, select the Next button.

  • Page 8

    Connecting to the Network << Previous If you can’t find your CD-ROM, you may download the iX6820 series Mini Master Setup, which includes the same step-by-step installation as the CD-ROM, by following the instructions below: Click here to access the iX6820 Drivers & Software page. 2.

Comments to this Manuals

Symbols: 0
Latest comments: