Table of Contents
Advertisement
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
When connecting to a 21 mm = ½"
3.
tap, first fit the adapter with a seal-
ing washer.
Open the water tap carefully and
4.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Note: Observe the draining heights.
The draining heights are: minimum:
60 cm, maximum: 100 cm
Installation and connection en
Siphon
Sink
Plastic pipe with
rubber sleeve
Connecting the appliance to the
electricity supply
Note: Your electrical domestic install-
ation for this appliance must comply
with the local legal provisions and
safety regulations, and should in-
clude a residual current circuit-
breaker.
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under Tech-
nical data → Page 59.
Check the mains plug is inserted
2.
properly.
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Fix and secure
the water outlet
hose with an el-
bow.
→ "Accessories",
Page 30
Fix and secure
the water outlet
hose with an el-
bow.
→ "Accessories",
Page 30
15
Advertisement
Table of Contents
