Getting Started; Unpacking; Source Component Hookups - Sony SDP-E800 Operating Instructions Manual

Getting Started
Unpacking
Check that you received the following items with the
processor:
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
• Connecting cords (3)
Inserting batteries into the remote
Insert two size AA (R6) batteries with the + and - on
the battery compartment. When using the remote,
point it at the remote sensor 19 on the processor.
When to replace batteries
Under normal use, the batteries should last for about 6
months. When the remote no longer operates the
processor, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction,
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Before you get started
• Do not connect the power cord to an AC outlet or
press the POWER switch before completing all
connections.
• The cable connectors should be fully inserted into the
jacks. Loose connection may cause hum and noise.
Source Component Hookups
The surround processor allows you to connect up to 3 '
digital audio (video) source components, such as a
DVD player, LD player (with AC-3 RF output) and CD
player (etc.). You can also connect 1 analog source
component, such as a VCR.
O
ANALOG
O
DIGITAL 3
O
DIGITAL 2
O
DIGITAL 1
What cords will I need?
• Optical digital connecting cord (not supplied)
diTfcaai- JfflsHiiiiiib*
• Coaxial digital connecting cord (not supplied)
d.
• Video cable (not supplied)
Yellow Yellow
• Audio/video cable (not supplied)
Yellow =Q3K Yellow
White (L) -^™€P= white (L)
Red (R) <C33Nn/ \«e> Red (R)
Make sure to match the color of the plugs and the jacks:
• Yellow jacks and plugs: Video signal
• Red jacks and plugs: Right audio channel
• White jacks and plugs: Left audio channel
4
EN