Sony SDP-E800 Operating Instructions Manual page 5

Getting Started
=■: signal flow
O
DIGITAL 1 (to a LD or DVD player)
Surround processor LD player
Surround processor DVD player
Notes for LD players
• Be sure to connect the LD player's AC-3 RF output to the
surround processor's AC-3 RF input jack.
• If your LD player has an optical digital output, connect it
to the DIGITAL 1 OPTICAL IN jack on this unit.
This connection can be used together with the AC-3 RF
connection.
Q DIGITAL 2 (to a DVD player or DBS tuner)
Surround DVD player/
processor DBS Tuner
Note
If your DVD player has a coaxial digital output, we
recommend connecting the DVD player's COAXIAL
DIGITAL OUTPUT to the this unit's DIGITAL 1 COAX IN
instead of making the optical connection to DIGITAL 2.
O
DIGITAL 3 (to a CD player or DAT/MD deck)
Surround
processor CD player
Surround
processor DAT/NID deck
Note
This unit is only compatible with digital components using
32 kHz/44.1 kHz/48 kHz sampling frequencies. It is not
compatible with 96 kHz.
O
ANALOG (to a VCR, etc.)
Surround
processor VCR (etc.)
Warning regarding the playback of DAT/MD sources
When playing DAT/MD sources through this unit, do
not play a DAT/MD that contains digital-recordings
made from a DVD player whose digital output was set to
"DOLBY DIGITAL*. HigTi volume noise will be output
which may damage this unit or your speakers.
5EN