Table of Contents
Advertisement
MEX-M72BT/N5300BT/N7300BD
How to display on the liquid crystal display by the test
mode:
1 In the state of source off (the clock is displayed on the liquid
crystal display), enter the test mode by pressing the buttons
4] → [MIC 5] → [
in order of the [
[
6] button for 2 seconds).
u
(Displayed characters/values in the following fi gure are ex-
ample)
[
4]
[MIC 5]
press
press
Software main version
2 In the state in which the software main version is displayed
on the liquid crystal display, enter the Bluetooth address
(BD_ADDR) display mode by pressing the [DSPL SCRL]
button twice.
(Displayed characters/values in the following fi gure are ex-
ample)
Software main version
(Not used for the servicing)
Set to this state
Bluetooth address (BD_ADDR)
of display.
Destination code
(Not used for the servicing)
3 The resetting operation is executed by pressing the [ OFF
SRC] button for 1 second after the confi rming ends, and the
unit returns to the normal condition.
2. Turn on the NFC function of the smartphone.
3. Start the NFC Tag Data Writing Application on the smartphone.
16
6] (press only the
u
[u 6]
press for
2 seconds
[DSPL
SCRL]
press
4. Tap the " " on the screen of the smartphone, then tap the "Select
Model" that is displayed on the screen of the smartphone.
5. Tap the "List" (BL_NAME side) on the screen of the smart-
phone, and select the model name of this unit from the list menu.
If you selected the model name of this unit from the list menu,
proceed to step 8 (page 17).
If the model name of this unit does not exist in the list menu,
proceed to the next step.
(The fi gure below is a reference example)
Not used
Tap
6. If there is no model name of this unit in the list menu on the
screen of the smartphone, select "Other" from the list menu.
(The fi gure below is a reference example)
Sony CONFIDENTIAL
For Authorized Servicer
List menu
– Continued on next page –
SYS SET
Advertisement
Table of Contents
