Philips PM3055 Operation Manual page 44

CHARACTERISTICS
5-9E
SPECIFICATION ADDITIONAL INFORMATION
@ Bench handling
Meets requirements of
® Salt Atmosphere
Structural parts meet
requirements of
@ EMI (Electronic Magnetic
Interference)
@® Magnetic Radiated
Maximum Susceptibility
Deflection Factor
5.8 SAFETY
@ Meets requirements of
@ Max. X-Radiation
@ Recovery time
C.f. MIL~T—28800 C par. 3.9.5.3 tested c.f.
par. 4.5.5.4.3.
MiIL—STD-—810
methode 516, proced.V
C.f. MIL—T—28800 C par. 3.9.8.1 tested c.f.
par. 4.5.6.2.1.
MIL—STD—810
methode 509, proced.|
salt solution 20 %
MIL—STD—461 Applicable requirements of part 7 : CE03
CLASS B CS01, CSO2, CS06, REO2, RSO3
VDE 0871 and VDE
0875, Grenzwertklasse
B
Tested conforming IEC 351-1 par. 5.1.3.1.
Measured with instrument in a homogeneous
7 mm/mT (0,7 mm/ magnetic field (in any direction with respect
gauss) to instrument) with a Flux intensity (p-p value)
of 1,42 mT (14,2 gauss) and of symmetrical
Sine wave form with a frequency of 45....66
Hz.
IEC 348 CLASS |
'VDE 0411 Except for power cord, unless shipped with
Universal European power plug.
UL 1244 Except for power cord, unless shipped with
CSA 556 B North American power plug.
Measured @ 5 cm from surface of instrument
for a target area of 10 cm?
15 min. —10°C + 25°C ambient temp.
30 min. ~20°C + 25°C ambient temp.
45 min. —30°C + 25°C ambient temp.
60 min. —40°C + 40°C ambient temp.