Sony Handycam Vision VideoHi8 CCD- TRV36 Operating Instructions Manual page 10

Make sure that tile power source is installed. When you want to record in tile Hi8
system, use Hi8 video cassette I-Ii_1 (CCD TRV36/TRV43/TRV46 only).
(1) While pressing the small blue button oi1 the EJECT switch, slide it in the
direction of the arrow. The cassette compartment autoinatically lifts up and
opens.
(2) Insert a cassette with the window facing out.
(3) Close the cassette compartment by pressing the "PUSH" mark on the cassette
compartment. The cassette compartment automatically goes down.
2
3
To eject the cassette
While pressing the small blue button on the EJECT switcb, slide it in tbe direction of the
arrow.
To prevent accidental erasure
Slide tbe tab on tbe cassette to expose tile red mark. If you insert tbe cassette with tile
red mark exposed and close the cassette compartment, tile beeps sound for a while. If
you tW to record with the red mark exposed, the pc_\oand A indicators flash, and you
c_lnllot record.
To re record on this tape, slide tile tab back out covering tile red mark.
10