Advertisement
Instrukcja obsługi ProDevice OMS130
4. OPERATION
1. Place the shredder on a hard surface in the designated, sheltered installation area.
2. Secure the shredder in position to prevent movement.
3. Make sure the shredded scrap bin is in the compartment and that the compartment
door is closed.
4. Open the media input compartment.
5. Apply the oil for cutting knives.
6. Extend the power cord and plug it into a power outlet.
7. Turn on the shredder with the main switch.
8. Start the cleaning function by holding down the REVERSE button for 6 seconds.
9. After cleaning, the shredder is ready for use. Place the storage device in the media input
compartment and close it.
10. Start the shredder by pressing the START button.
11. The shredding cycle takes 60 seconds in the automatic mode (3 min in manual mode),
during which time the carrier will be completely shredded.
12. Stop the shredder by pressing the STOP button or by opening the input media drawer.
13. Place another media in the media input drawer and press the START button to restart
the device.
14. In the event of overloading the device, the work of the shredding knives will be stopped.
To restart the shredder, lift up the main switch. Then start the shredder operation by
pressing the START button.
15. To properly shut down the device, after the shredding cycle is complete, press the STOP
button and use the main switch.
16. Disconnect the power cord from the power outlet and wind it up.
www.pro-device.com
8
Advertisement
