Download Print this page
CrimeStopper RS901 RS900ER Operating Instructions Manual
CrimeStopper RS901 RS900ER Operating Instructions Manual

CrimeStopper RS901 RS900ER Operating Instructions Manual

Series i

Advertisement

Quick Links

CONGRATULATIONS on your choice of a CoolStart™ Remote Engine Starter by Crimestopper
Security Products Inc. This system is the most advanced and reliable Remote Start system available
on the market today.
This booklet contains the information necessary for using & maintaining your remote start system. If
any questions arise, contact your installation dealer or Crimestopper Security Products Inc. at (800)
998-6880.
*IMPORTANT INFORMATION-MODEL RS901*
When RS901 remote starter is activated by an ALARM SYSTEM REMOTE CHANNEL OUTPUT, or a
FACTORY KEYLESS ENTRY SYSTEM the following features may not be available depending on
the type of input used to trigger the Remote Start:
TIMED SELF-START MODE
INFINITY RUN MODE
This device complies with FCC Rules part 15. Operation is subject to the following
two conditions: 1) This device may not cause interference, and (2) this device must
accept any interference that may be received, including interference that may
cause undesired operation. The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modification to this equipment. Such
modification could void the user's authority to operate the equipment.
OPERATING INSTRUCTIONS
RS900ER/RS901 SERIES I
INTRODUCTION

Advertisement

loading

Summary of Contents for CrimeStopper RS901 RS900ER

  • Page 1 Security Products Inc. This system is the most advanced and reliable Remote Start system available on the market today. This booklet contains the information necessary for using & maintaining your remote start system. If any questions arise, contact your installation dealer or Crimestopper Security Products Inc. at (800) 998-6880. *IMPORTANT INFORMATION-MODEL RS901*...
  • Page 2 OPERATION CAUTIONS AND WARNINGS CRIMESTOPPER SECURITY PRODUCTS, INC. and its VENDOR shall not be liable for any accident resulting from the use of this equipment. This system is designed to be professionally installed into a car or vehicle in which all items, such as parking brake and all associated components, door switches, transmission shift linkage, throttle linkage, and all engine safety features, are in perfect working condition.
  • Page 3: Remote Engine Control

    The system has three remote modes of controlling the engine. Remote starting the engine Turning off a remote started engine Idle Down/Infinity Run modes REMOTE ENGINE STARTING - SUCCESSFUL START: 1) Press Remote Start button for at least one second. 2) Parking lights turn on solid, Ignition/Acc On, Doors lock, and Sensor disable output turns on (optional for remote start use with a host alarm).
  • Page 4 IDLE DOWN MODE This mode allows the unit to take over operation of the parked vehicle while the ignition key is removed and you exit the vehicle. The vehicle is put into a remote running condition before you exit and it will remain running for the programmed run time or until you come back.
  • Page 5 INFINITY RUN MODE This mode can only be engaged when "Idle Down" is being engaged. It allows the vehicle engine to remain running INDEFINITELY after the programmed run time elapses. This mode is especially desirable for protecting police, emergency, or work vehicles that need to be left running unattended. This mode will allow the vehicle to be left running and unattended without the ignition key in the switch preventing the vehicle from being stolen.
  • Page 6: Convenience And Safety Features

    times) 4) Then the system automatically exits program mode and returns to normal operation. TIMED SELF-START MODE: FLASHING PRESS START HOLD FOR 4 SECONDS AFTER NOTES on Programming Self Start Mode 1) If you do not hold Remote Start button for the full 4 seconds until the lights start flashing, vehicle will remote start.
  • Page 7 1) To operate, press (#3) trunk release button for at least one second to remotely open trunk. CONVENIENCE AND SAFETY FEATURES VALET MODE/ STARTER KILL OVERRIDE The keyless entry will still function normally while in valet mode. In the event of a lost or broken transmitter, the Starter Disable/Anti-grind must be overridden in order to start the vehicle with the key.
  • Page 8: Transmitter Programming

    Main Alarm / Remote Starter Power Fuse(s) may need to be removed before service. This will further prevent the service personnel from accidentally arming and triggering the system but most likely not !! WARNING !!: Remove main power fuse before jump starting or charging a required.
  • Page 9 CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 SOUTH TAPO ST. SIMI VALLEY, CA. 93063 RS900I OP REVA...

This manual is also suitable for:

Rs-900erRs-901