Marquis Vector21 Owner's Manual page 37

SWIM SPA CONTROLS: V174S & V174K
Jets 2: Controls bank of three jets on the swim end.Touch-
ing this button once will turn on to low speed. You will know
it is on when a white ring around the button is present.
Touching the button a second time will turn the pump on to
high speed. You will see the internal jet bubble icon increase
in size. Touching the button again will turn the pump off. If
left on, high speed will run for 15 minutes and then switch
down to low speed for 15 minutes before turning off.
Jets 3: Touching this button once will turn on to low speed.
You will know it is on when a white ring around the button
is present. Touching the button a second time will turn the
pump on to high speed. You will see the internal jet bubble
icon increase in size. Touching the button again will turn
the pump off. If left on, high speed will run for 15 minutes
and then switch down to low speed for 15 minutes before
turning off.
Light: Touching this button will turn on the interior LED
lights. Touching this button repeatedly will cycle through an
array of colors options. Touch the button to turn off the lights
at any point. If left on, the lights will automatically turn off
after 60 minutes. The button will have a white ring around it
when it has been turned on.
Soak: Touching this button will turn off all pumps that may be running at the time and you will
know the feature has been activated when it has a white ring around the button. This feature
allows the user to soak in completely still water if they choose. Light functions will continue to
operate without disturbing this feature. If selected, the soak function will continue for 60 minutes
and then automatically resume normal operation. Simply pressing any of the pump buttons will
override the soak feature and resume normal operation. Note: Because no pumps run while the
soak feature is on, heating of the water will not occur.
Pressing the back button will take you back to the home screen.
37