Device Functions - Navitel R35 User Manual

20 | USER MANUAL
Buttons
Button
In Video Recording mode, press the button for a few seconds and then release it to turn off the device (the current recording
will be saved automatically).
In Video Recording mode, press the button to protect the current video file. Protected files cannot be deleted or overwritten.
After finishing recording the protected file, the device will start recording the unprotected file.
EN
Press and hold the button for about 7-15 seconds to stop recording and reset to factory settings (the current recording will
be saved automatically).

Device functions

To format the SD-card, connect the DVR to your smartphone via Wi-Fi. Open Navitel DVR Center mobile application and
Format SD-card
navigate to Settings — Format SD card. Confirm the action.
When the external power is connected, the DVR will turn on and start recording video automatically.
Video recording
When the external power is disconnected, the DVR will save the recording and turn off.
This feature allows you to save a video as a set of files. You can set the duration of the recording in the mobile application.
Loop recording
If the memory card runs out of space, the unprotected files will be overwritten in the order in which they were created.
Audio recording Record video with or without sound.
If the vehicle is hit by something, the DVR will automatically lock the current video. Protected files cannot be deleted or
G-sensor
overwritten.
In Parking mode, the user has access to the following modes: impact control and continuous time-lapse recording.
Parking monitor* Parking mode — impact control is based on the operation of the G-sensor: when it is triggered, an emergency file is written.
Parking mode — continuous time-lapse recording. Records video continuously at a user-defined frame rate.
* Warning. The mode is available only when the DVR is connected to a permanent power supply through a device that prevents excessive battery discharge
- NAVITEL SMART BOX MAX.
Functions