Device Functions - Navitel RC3 PRO User Manual

32 | USER MANUAL

Device functions

Format SD-card
EN
Record
Loop recording
Record audio
Stamp
LCD OFF
G-sensor
Parking monitor*
GPS location
Formatting a microSD card in the DVR is necessary for the correct operation of the device. Before using a microSD
card or in case of data error, please format the microSD card. For formatting the SD-card in Menu mode select Format
SD-card and confirm it.
Connect the device to an external power supply and it will start recording automatically. Press the OK button to stop
recording. Press OK again to record another video. Each video will be saved automatically.
This feature allows you to save a video as a set of files given in the duration menu. If the memory card runs out of
space, the unprotected files will be overwritten in the order in which they were created.
Record video with or without sound.
This function adds date stamp to the record.
The device can automatically shut off the screen to reduce power consumption; time interval can be set in the Screen
Saver menu.
If the vehicle is hit by something, the DVR will automatically lock the current video.
In this mode, video recording is available at 1fps, 2fps or 5fps. Recording is conducted from all three cameras of the
device simultaneously.
Device supports built-in GPS chipset and GPS antenna, it can show longitude, latitude and other information on
your current location. Press GPS Status to check GPS dates. Press On in the GPS Stamp menu to add GPS information
to your files.