Device Functions - Navitel R980 4K User Manual

NAVITEL R980 4K | 25

Device functions

It is necessary to format a microSD card for the correct operation of the device. Please format the microSD card
SD-card formatting
before using the DVR or in case of a data error. To format the SD-card in Menu select Format SD-card and confirm it.
Video recording Connect the device to an external power supply and it will start recording video automatically.
EN
The function allows you to save video recordings in separate fragments, the duration of which can be set in Settings.
Loop recording
If the card runs out of space, unlocked files will be overwritten in the order in which they were created.
Audio recording Record video with or without sound.
Stamp The function adds date, time, model number and GPS coordinates to the recording.
The device can automatically turn off the screen to reduce power consumption. In Settings, you can select the time
LCD OFF
interval for the screen to automatically turn off.
When the built-in G-sensor reacts to a sudden change in driving speed, emergency braking, impact, etc., the DVR automatically
G-sensor
starts recording protected video. The sensitivity of the sensor is set in Settings.
In parking mode, the user has access to the following modes: impact control and continuous time-lapse recording.
Parking mode* Parking mode — impact control is based on the operation of the G-sensor: when it is triggered, an emergency file is written.
Parking mode — continuous time-lapse recording. Records video continuously at a user-defined frame rate.
GPS status To check your GPS signal strength, go to GPS > GPS Status.