Shark LIFT-AWAY PRO STEAM POCKET MOP Quick Start Manual

Please be sure to read the enclosed Owner's Guide prior to using your unit.
LIFT-AWAY
With Intelligent Steam Control
QUICK START GUIDE
WHAT'S INSIDE
A
Steam Mop Handle
B
Steam Mop Body
C
R emovable Handheld
Steamer
D
Intelli-Mop™ Head
E
Dirt Grip™ Pad (x2)

ASSEMBLY

1
2
(Click)
1. Screw the mop handle into the Steam Mop body
(screwdriver not included)
2. Slide the Intelli-Mop Head post into the Steam Mop
body. Push until you hear it click securely into place.

FILLING THE WATER TANK

1. Open the water tank cap.
2. Use the filling flask and pour
water into the tank Do not overfill.
Replace the cap on the water tank.
S3973_QSG_161122
PRO STEAM POCKET
®
F
Filling Flask
G
Accessory Hose
H
Garment Steamer
I
S mall Above-Floor
Pocket Tool and Pad
A
B
C
D
®
®
TOUCH-FREE TECHNOLOGY
1. Lift the mop straight
up by the handle until
the Intelli-Mop Head
is hanging straight
down. Center the mop
head above the pad.
Press down the release
buttons on the sides
of the head post, and
both sides of the mop
head will drop open.
2. Slip the mop head's 4
corner tabs into the 4
corner pockets of the
Dirt Grip™ Pad.
3. Gently press the
Intelli-Mop Head to the
floor on one side of the
pad, and that side will
click into place.
4. Flip the other side of the
Intelli-Mop Head over
onto the floor to click
into place.

REMOVING THE PAD

Lift the mop straight up
by the handle until the
Intelli-Mop Head is hang-
ing straight down. Press
down the release buttons
on the sides of the head
post, and both sides of the
mop head will drop open.
F
CAUTION: It is recommended that you allow the pads to
cool off before removing them from the accessories to
avoid possible scalding injury.
MOP
E