Technical Features And Specifications; Interface Frequency - V7 D1711-N6 User Manual

Technical Features and Specifications

Item
19"
Display Size
17"
Panel
19"
Pixel Pitch
17"
Analog
Connector
Digital
Tilt Tilt Angle
19"
Dimensions
Net
(W x H x D)
17"
19"
Weight Net
17"
AC
Power
Consumption
Temperature
Operating
Humidity
Condition
Altitude
Temperature
Storage
Humidity
Condition
Altitude
Description
376(H)x301(V)mm
337.9(H)x270.3(V)mm
0.294(H)x0.294(V)mm
0.264(H)x0.264(V)mm
D-sub
DVI-D(Optional)
-5°~20°
About 400(W)x420(H)x187(D)mm
About 365(W)x387(H)x169(D)mm
About 3.7kg
About 3.6kg
AC 100~240V,50Hz/60Hz,1.2A
Active:<42W/Standby:<2W
5°C to 40°C
20% to 80% (No Condensation)
Under 10,000 fts
-20°C to 60°C
5% to 80% (No Condensation)
Under 40,000 fts

Interface Frequency

1. The following frequency range is the working period. If the entered mode between below
period but not match the frequency of supported timing, display optimization would not be
assured. If the entered mode is out of the working period, the display will be blanking
(just show "INPUT SIGNAL OUT OF RANGE") then go to power saving.
2. Basically, mode judgment is regardless the sync polarity except both or more modes that
are all belong to the supported timing list and could be judged by sync polarity only.
3. In the meantime, real entered frequency of the supported timing is not requested exactly.
4. Normalization of VGA card' s deviation will be acceptable.
5. Horizontal Frequency 30 ~ 82KHz
6. Vertical Frequency
56 ~ 76Hz
- 7 -