Advertisement
1. On/off switch
This switch turns the camera system power on and off.
2. Power indicator light
This LED glows red when power is on.
3. Camera input connector (Camera In)
- Connect the camera cable connector here. Be sure the cable connector is fitted securely
to the input connector.
4. Video output connector (Video Out)
The video output connector
supplies an NTSC
color signal to the VTR.
Connect the
silver end of the video cable here. The white end should be connected to the video input
connector on the video tape recorder.
5. Audio output connectors (Audio Out)
These connectors supply audio signals from the camera stereo microphone to the VTR.
Connect one end of the audio cables to the power supply, the other end to the audio in
connectors on the recorder.
Use the L({left) connector when recording the sound from
monaural camera.
These cables can be identified by their red and white end.
6. Remote pause connector (Remote Pause)
This connector connects to the VTR with the remote control cable, in order to pause the
VTR
from the camera.
Connect one end of the remote pause cable to this connector,
the other end of the cable to the remote pause connector on the video tape recorder.
This cable can be identified by its black end.
7. Power cord plug
Connect the two prong polarized plug to a wall socket (120V AC).
If the socket works
for an ordinary table lamp, for instance, it is right for your unit.
The following cables are provided with the power supply.
2 Audio cables (One cable has red connectors, the other has white connectors)
(VJAWO0009/V JAWO010)
Remote pause cable (Black connectors) (VJAKO115)
Video cable (One end has a white connector, the other has a silver connector) (VECK126)
Advertisement
