Advertisement
Devices, Activities and Settings
Buttons 2 – Setting Up Toggle Commands
nd
The Buttons 2 Tab is for setting up a 2
command for a Toggle. For example, you might want button 8
to Mute On when pressed the first time and Mute Off when pressed the second.
Button Settings – Setting Up Repeat or Toggle
Under this tab you can set a button to repeat a command like say Volume up or down. This way the
user can ramp the volume by pressing and holding the button. Also, this is the tab where you would set
the button to toggle between the two macros set in Buttons 1 and 2.
Hall Technologies
2/1/2024
Page 18 of 28
Advertisement
