Advertisement
Devices, Activities and Settings
Commands – Edit or Add
The HIVE-KP8 also comes with default commands for the default Hall devices or new commands can be
added and connected to devices added in previous tab.
• Edit Commands – Common commands for the Hive Nodes, Versa-4k or the 1080PTZ Camera
have been added by default. You might still want to double check that the Hall devices you
updated on the previous are associated with the Commands by clicking on the Editi button and
verifying the Device drop down.
• Add New Commands– If you want to add additional Hall devices commands then you can select
Edit and update the existing ones and associate it with the device connection from the previous
tab. If you want to add a new device command select Add and input the device API command
the needed line ending.
• Hex and Delimiters – for ASCII commands simply input the readable text followed by the line
ending which is typically a CR and LF (Carriage Return and Line Feed). The CR and LF are
represented by a switch \x0A\x0A. If the command needs to be Hex, then you need to apply the
same switch.
a. This is an example of an ASCII command with a CR and LF: setstate,1:1,1\x0d\x0a
b. This is an example of a VISCA HEX command: \x81\x01\x04\x3F\x02\x03\xFF
• IR Control – The Hive KP8 can be sent to control devices such as displays, either through the
Versa-4k IR port or from our Hive-Node-IR. IR commands can either be learned using the Hive
Node IR and the Node Learner utility or by going to the IR database at:
https://irdb.globalcache.com/
required.
Hall Technologies
2/1/2024
Simple copy and paste the commands in as is. No HEX switch is
Page 14 of 28
Advertisement
