Sharp EL-556G Operation Manual page 14

and hexadecimal numbers.
Conversion to each system is performed by the
following keys:
2ndF) {+BIN} : Converts to the binary system. "BIN"
appears.
2ndF} (-oct] : Converts to the octal system. "OCT"
appears.
ndF) (Hex) : Converts to the hexadecimal system.
"HEX" appears.
2ndF} [*bec| : Converts to the decimal system.
"BIN", "OCT", and "HEX" disappears
from the display.
Conversion is performed on the displayed value
when these keys are pressed. |
Note: In this calculator, the hexadecimal numbers
A
A~F are entered by pressing (y*) ,
B Cc D E F
iv_!} , (x2) , Gog) , (in), and [nCr} and
displayed as follows:
A> Hi GS 7 Esp
Bo rf Dog Fo}
in the binary, octal, and hexadecimal systems, frac-
tional parts cannot be entered. When a decimal
number having a fractional part is converted into a
binary, octal, or hexadecimal number, the fractional
part will be truncated. Likewise, when the result of
a binary, octal, or hexadecimal caiculation includes
a fractional part, the fractional part will be truncated.
In the binary, octal, and hexadecimal systems,
negative numbers are displayed as a complement.
2 ee