Advertisement
SC-GSC INSTALLATION MANUAL
STEP 6.- Installation of side clamps at the perimeter
To ensure that the modules maintain their correct position, it is necessary to mount the KFR-SC clamp (quick fixing clamp)
on the sides of the module rows.
To mount the clamp on the guides, the following steps are necessary:
1. Place the clamp in the guide
with the lower nut parallel to
the guide.
Ref.
FTA_GS_M_SC-GSC-en
2.
To fix the clamp to the guide,
the lower nut must be turned
perpendicular to the guide by
means of the screw, the screw
head is pressed down and
turned. The nut has a serrated
rail to secure the fixing.
Rev: 0
12/12/23
3.
Insert the corresponding
elements, two panels in the
case of an intermediate clamp,
or a panel and a gauge in the
case of a lateral clamp.
4.
To fix the inserted elements
it is necessary to turn the screw
until they meet the guide.
Check that the lower nut
remains perpendicular to the
guide.
9 of 11
Advertisement
