Page 1
SC-GSC INSTALLATION MANUAL SC-GSC SYSTEM DESCRIPTION Coplanar mounting system with CL-GS "Clamp for fixing solar panels by clipping", for installation of solar panels. 1. CHARACTERISTICS Description: Coplanar mounting system using an anchoring system by clipping the panels together. System inclination: Coplanar mounting with parallel installation to the roof surface.
Page 2
SC-GSC INSTALLATION MANUAL 2. COMPONENTS KFR-SC PGS-A TU-RXA2 GM-A CL-GS CL-PG CL-EX 2.1 Components: Clamps y gauges for mounting solar panels Lateral position clamp KFR-SC DIN 6921 A2 PGS-A GM-A GM-A TU-RX A2 Option 1: Quick clamp Option 2: Simple clamp Clip-on clamp MÓDULE...
SC-GSC INSTALLATION MANUAL 4. EXAMPLES OF APPLICATION Example of the placement of the modules Ref. FTA_GS_M_SC-GSC-en Rev: 0 12/12/23 3 of 11...
Page 4
SC-GSC INSTALLATION MANUAL 5. INSTALLATION MANUAL Coplanar mounting system with CL-GS "Clamp for SC-GSC fixing solar panels by clipping", for installation of solar panels. Read these installation instructions before starting installation and familiarise yourself with the system components. Installation must only be carried out by qualified and experienced personnel.
SC-GSC INSTALLATION MANUAL PROCESO DE INSTALACIÓN: STEP 1.- Consult installation drawing Consult the installation drawing on the roof, where the distribution of the modules is defined as well as the structures that support them and their fixing points. A. Plan view of SC-GPD system with horizontal module orientation (landscape type).
Page 6
SC-GSC INSTALLATION MANUAL B. Plan view of SC-GSC system with horizontal module orientation (landscape type). F (mm) G (mm) (mm) 0,7B ≤ C ≥0,5B (B-C) /2 min 35 min 20 (n*B) + ((n-1) * E) + (2*F) C: consult the module manufacturer's recommendations.
Page 7
SC-GSC INSTALLATION MANUAL The type of fixing system and the location of its installation points shall be adapted to the needs of the supporting structures and at the same time to the needs of the roofs where they must be installed.
Page 8
SC-GSC INSTALLATION MANUAL STEP 4.- Installing the module in the profile Steps to install the module with the clamps already in place: 1. Press the panel (with the clamp already fixed) on the It is important to check that the module is properly...
Page 9
SC-GSC INSTALLATION MANUAL STEP 6.- Installation of side clamps at the perimeter To ensure that the modules maintain their correct position, it is necessary to mount the KFR-SC clamp (quick fixing clamp) on the sides of the module rows. To mount the clamp on the guides, the following steps are necessary: 1.
Page 10
SC-GSC INSTALLATION MANUAL Prepare 4 KFRSC3050 quick fixing clamps to be mounted at the ends of each row of panels. Each of these clamps is fitted with a GM-A gauge, mounted as shown in the figure: The chosen gauge size must be equal to the frame height of the modules to be installed.
Page 11
SC-GSC INSTALLATION MANUAL STEP 8.- Mounting accessories ACCESSORY 1: Clip for earthing cable A single action allows the earth wire to be stripped, electrically connected and fitted in one easy step, while installed on the PV module frame. Installation process: 1.