ION UBER BOOM User Manual page 7

5. Lights Button
Press this button to cycle through the ten light modes. See
more information.
Press and hold this button to turn the lights o .
Double-press this button to activate the Bass Boost feature and enhance the speaker's
bass frequency response.
Note: To access the connection ports, pull the tab on the protective rubber panel to release it
and access the ports.
6. Reset
TM
If Uber Boom is behaving abnormally, insert a paper clip into this hole and gently push
the reset button until the unit resets. Try this only after you have first attempted to restart
Uber TM Boom using the Power button.
7. MicroSD Card Slot
Insert a microSD card here to play stored audio files. See
for more information.
8. Aux Input
Connect an MP3 or other audio player to Uber
cable (not included). See
for more information.
9. USB-C® Charging Port
Connect the USB-C® end of the included cable to Uber
A end to a 5V, 2A USB power adapter (sold separately) and plug it into a power outlet, or
your computer (powered on). See
information.
The LED next to the Charging Port will change color based on the charging status. When
plugged in and charging, the LED will be red. When fully charged, the LED will turn o .
When the unit is powered on and using battery, the LED will be blue.
ION Audio Uber™ Boom User Guide
6 7 8 9
Operation > Connecting an Audio Device Using the Aux Input
Setup > Charging and Battery Information
Operation > Light Modes
Operation > SD Playback Mode
TM Boom here using a 1/8" (3.5 mm) auxiliary
TM Boom here, then connect the USB-
for
for more
7