Advertisement
• To perform the Initial Setup again after the setting is completed, press
HOME, select "Miscellaneous" - "Initial Setup", and press ENTER.
1. Speaker Setup
1. Select the connected speaker configuration, and press ENTER.
Note that the image on the screen changes each time you select the number
of channels in "Speaker Channels".
Speaker Setup
Speaker Channels
Subwoofer
Height Speaker
Speaker Impedance
Select how many speakers you have.
2. The speaker combination selected in step 1 is displayed. "Yes" is displayed
for the selected speakers. If the setting is correct, press ENTER.
3. Select "Next" and press ENTER. Then a test tone is output from each speaker
to confirm the connection. Selecting each speaker with the cursors
DOWN will output the test tone. Press ENTER after confirmation.
4. If there is no problem with the speaker connection, select "Next" and press
ENTER. To return to "Speaker Setup", select "Back to Speaker Setup" and
press ENTER.
2. ARC Setup
To connect with an ARC-compatible TV, select "Yes". The ARC setting on this
unit turns on, and you can listen to the TV's audio through this unit.
• If you select "Yes", the HDMI CEC function is enabled and power
consumption increases during standby.
Setup
5.1 ch
Yes
- - -
6 ohms or above
Next
ENTER
/
UP/
75
Advertisement
