Advertisement
Switching the display
Repeatedly pressing the
STATUS button on the remote controller switches
the display of the main unit in the following order.
• The content displayed depends on the source, BLUETOOTH, etc., being
played.
• Depending on the audio signal, "B (Back)" or "W (Wide)" is displayed next to
the number of channels of the input format.
• Not all the information is necessarily displayed.
Listening mode
Dolby Surround
Input format
Dolby
The display is switched in
a few seconds.
Sampling frequency
Input signal resolution
1 0 8 0 p / 5 9 1 6 : 9
Input source and volume
BD/DVD
5 . 1
4 8 . 0 k H z
4 0 . 0
Playback
37
Advertisement
