Sharp YO-250M Service Manual page 11

Data transfer restrictions
TEL mode: 537 characters
SCHEDULE mode: 523 characters
MEMO mode: 544 characters
<For English version>
ZQ-2500SP
<For Spanish version>
<For Portuguese version>
© When transferring EXPENSE data by mode from the YO-100
series to the YO-250M/260M, ZQ-2550M/2750M/2500/2700, an
"ERRO EM DISP. DE ENTRADA/SAIDA* may occur. This will occur
when there is not enough memory space to be assigned as the
area for payment type data; EXPENSE data from the YO-100
series does not have this space. If the error occurs, delete un-
necessary data on the YO-250M/260M, ZQ-2550M/2750M/2500/
2700 to increase the amount of free memory, then transfer the
data again. Once an "ERRO EM DISP. DE ENTRADAVSAIDA" oc-
curs, all EXPENSE data transferred to the YO-250M/260M, ZQ-
2550M/2750M/2500/ 2700 before the error is cleared.
<For French version>
¢ When transferring EXPENSE data by mode from the YO-100
series to the YO-250M/260M, ZQ-2550M/2750M/2500/2700, an
"ERREUR E/S" may occur. This will occur when there is not
enough memory space to be assigned as the area for payment
type data; EXPENSE data from the YO-100 series does not have
this space. If the error occurs, delete unnecessay data on the
YO-250M/260M, ZQ-2550M/2750M/2500/2700 to increase the
amount of free memory, then transfer the data ayain. Once an
"ERREUR E/S" occurs, all EXPENSE data transfered to the YO-
250M/260M, ZQ-2550M/2750M/2500/2700 before the error is
cleared.
<For German version>
© When transferring EXPENSE data by mode from the YO-100
series to the YO-250M/260M, ZQ-2550M/2750M2500/2700, an
"VO GERATE FEHLER* may occur. This will occur when there is
not enough memory space to be assigned as the ana for payment
type data; EXPENSE data from the YO-100 seriesdoes not have
this space. If the error occurs, delete unnecessay data on the
YO-250M/260M, ZQ-2550M/2750M/2500/2700 to increase the
amount of free memory, then transfer the data again. Once an "I/O
GERATE FEHLER* occurs, all EXPENSE data trasferred to the
YO-250M/260M, ZQ-2550M/2750M/2500/2700 befire the error is
cleared.
<For Italian version>
® When transferring EXPENSE data by mode fron the YO-100
series to the YO-250M/260M, ZQ-2550M/2750M25 00/2700, an
"(0 ERRORE DELLE UNITA* may occur. This wil occur when
there is not enough memory space to be assignedas the area for
payment type data; EXPENSE data from the YO-1)O series does
not have this space. If the error occurs, delete umecessary data
on the YO-250M/260M, ZQ-2550M/2750M/2500/2700 to increase
the amount of free memory, then transfer the data again. Once an
"/O ERRORE DELLE UNITA" occurs, all EXPENSE: data trans-
ferred to the YO-250M/260M, ZQ-2550M/2750M/250/2700 before
the error is cleared.
® When transferring EXPENSE data by mode fron the YO-100
series to the YO-250M/260M, ZQ2550M/2750Mes 00/2700, no
data verification can be carried out.
pant inan eahe